Best Ways to Fish Lures for Pike UK

Table of Contents

Best Ways to Fish With Lures for Pike Guide

A useful resource for anglers at both the expert and novice levels is the best ways to fish lures for pike. Basic lure tackle setups, seasonal lure fishing advice, working your lure techniques, and a few well-liked techniques are all covered. In addition to other helpful advice and strategies that can make a bad day into one to remember, there are certain sizes and colours that work better in particular weather.

A very successful and enjoyable method of catching these fish is pike lure fishing. However, success depends on using the right tackle and lures. Additionally, it’s crucial to understand how to use lures and tackle properly. This manual will assist pike lure anglers in selecting the best equipment and lures for their fishing trip.

It’s crucial to select the best rod and reel for pike lure fishing. For most applications, a weight rod between 40 and 80 grammes is a good option. When angling for larger pike or in deeper water, heavier rods may be used. For the purpose of preventing fish from removing the line from the reel, reels should have a smooth drag system.

There are a few things to take into account when choosing lures for pike. The size of the lure is the first factor. The length of 4-6 inches is a good range for lures. Although larger lures can be used, their effectiveness might not match that of smaller lures. Additionally, it’s critical to select lures with the most natural-looking colour possible. You’ll catch more pikes if you do this.

For pike lure fishing to be successful, the type of fishing line is also crucial. For this kind of fishing, monofilament line with a minimum 15 pound test strength should be used. It’s also a good idea to use fluorocarbon line. If at all possible, for this kind of fishing, use braid. Your line will float to the surface thanks to the buoyancy of braid. This will lessen the chance that pike will notice the line on the water’s surface.

 

Best Ways to Fish Lures for Pike Beginners Set Up

Many anglers find it difficult to select the ideal tackle and lures for the desired fishing technique when it comes to pike lure fishing. It can be difficult to know where to begin with the wide range of opinions and products available on the market. I’ll try to give some fundamental tips for those just getting started with pike lure fishing in this blog post.

Selecting the right lures for your preferred method of fishing is the first step to successful pike lure fishing. Choosing a lure can be difficult because there are so many options, but if you already know the type of water you want to fish in and what you want to catch, it should be easy to focus your search.

For instance, lures like spinners, spoons, and crankbaits will be more effective than jigs and worms if you are fishing in a slow-moving river or stream. On the other hand, if you’re fishing for pike in open water, big plugs and jerkbaits are your best bet.

The size of the pike you are aiming for should be your second consideration. Sizes of fishing lure can be determined by weight, length, or volume (how much liquid they hold). A lure larger than 12 cm will be needed if you’re fishing for large pike in open water.

However, it’s crucial to avoid focusing only on bigger lures because you risk missing out on smaller fish. The most effective method for choosing the right lure size is to change the lures regularly to get an idea on what the pike is attracted to on the day.

Choosing the quantity of lures to use and the weight system to use is the third step. Split shot, egg weights, and lead core line are the most popular weight systems, although there are many others.

The size of the lure you use and the type of water you are fishing in will again influence your decision. For instance, if you’re fishing in a river or stream with a slow current, a light tackle rod and reel spooled with 4-6lb test line are ideal. In this case, a split shot weight system would be the best choice because it will give the lure enough weight to cast while reducing line drag.

On the other hand, if you were fishing for larger Pike in open water, a heavier tackle rod and baitcasting reel spooled with 40-80 lb test braided line would be more appropriate. Egg weights or a lead core line would be the best option in this scenario as they will provide enough weight to cast the lure far.

Attaching your preferred lure and starting to fish are the final steps. Like all forms of fishing, the more time you spend on the water, the higher your chances are of landing a fish. Whether you use conventional one hook systems or two hook systems when pike fishing, there is always a chance to catch multiple fish at once. This method is frequently used to catch both small and large fish, so it’s important to persevere and not give up if you don’t get a bite right away.

Regardless of the type of fishing, persistence and patience are the keys to success. So go outside and start lure fishing for pike, you will not regret it.

Best Pike Lure rod and Reel

I wouldn’t suggest buying expensive tackle if you’re just starting out until you are completely confident casting and using lures correctly, but more importantly, until you are confident handling and unhooking a pike. If you’re a beginner, I wouldn’t advise investing in expensive tackle until you are completely comfortable casting and using lures properly, but more importantly, until you are comfortable handling and unhooking a pike.

When selecting the best rod and reel for pike fishing, keep in mind the weight and action of your preferred lure. It is advised to choose a lighter option for smaller lures, such as a 7ft 2in casting weight 30-80g rod paired with a fixed spool reel (for beginners) or a baitcaster reel loaded with 30lbs braid. A heavier setup, such as an 8ft 3in 50-120g rod and a Spin 4000 reel loaded with 40lbs braided line, is required if you choose to use larger lures.

It’s not necessary to buy a new reel right away if you’re just starting out with pike lure fishing. Use braid loaded on your existing float or feeder reel in the sizes 2500 to 4000.

Use a wire trace whenever you are pike fishing, always!

Daiwa Spinning Rod and Reel

This Daiwa ninja X spin rod is a freat starting point for a newbie to lure fishing for pike, paired with the Daiwa Legaliss fixed spool reel is a well balanced set. Inexpensive but not short on quality providing the ideal starting point for the beginner.

Lure Fishing Rod Daiwa Ninja X SPIN 2.7m 40-80g
Lure Fishing Rod Daiwa Ninja X SPIN 2.7m 40-80g
£61.00

  Lure Fishing Rod Daiwa Ninja X SPIN 2.7m 40-80g Lure Fishing Rod Daiwa

Daiwa 17 Legalis LT Reel
£68.45

Spinning Reel with Entrance Drag Measurement 6000 comes with a Energy-Deal with Winder Knob

Best ways to Fish Lures for Pike at Depth

When choosing the right tackle and lures for pike, it’s critical to consider the lure’s speed, pattern, size, and action. It’s crucial to take the lure’s speed, pattern, size, and action into account when selecting the appropriate tackle and lures for pike. In general, the best lures are those that look natural and move the way that pike would expect them to in the wild.

Depth is a crucial element when pike fishing. Utilize a lure that is swimming relatively close to the bottom whenever possible. This can be accomplished by sinking the lure with a weight on the line or by using a depth finder to determine how deep the pike are in the water.

Best ways to Lure fish for Pike for Each Season

When it comes to pike lures, there is no one size fits all method. You can choose the appropriate tackle and lure to use when lure fishing for these apex predators by being aware of the environment that they are currently residing in. Generally, try to look as much like the pike’s natural prey as possible.

Spring

You might expect that the pike would be drawn into shallow water during this time of year in search of prey. After spending the entire winter outside, they are starving and worn out. Pike Pike begin to feed aggressively, and crashing takes are produced by shallow divers, darters, and burning a soft plastic paddle tail shad just below the surface. For deeper divers, try jerking your lure back quickly.  Also effective at this time of year are surface frog lures and wake baits.

Summer

In order to cool off, eat, and reproduce, pike typically move into deeper water during the hot summer months. It makes no sense to fish on top of the water during this time of year when it is at its warmest, so we should try to determine how far down our lures will go. 

Faster bait, like mid-depth crankbaits above the strike zone, won’t require the pike to expend energy rising from the depths to take them, while slower moving plastics, like soft shads with a weighted jighead or spinners, work best with an occasional twitch on the slow retrieve.

It is not advisable to go pike fishing when it is too hot because pike find it challenging to recover in the warmer water when oxygen levels are at their lowest after a demanding battle. If you do manage to catch a pike, it’s best to get the fish to the net as soon as you can, unhook it, and get back to the boat as soon as you can to prevent releasing a dead pike.

Autumn

The pike are hard-feeding and getting into “fighting fit” shape in the fall as they get ready for the winter. Use quick-searching lures on large bodies of water, such as trolling with quick retrieves or casting jerkbaits at depths of at least ten feet, as baitfish begin to shoal up as the weather cools and the days grow shorter.

Use Bull Dawgs, Savage Eel, River Roach, and Wolf Tails when fishing deeper waters. Long pulls and pauses at various speeds, straight retrieves at medium speed, and noticeable twitches interspersed with medium retrieve action are all acceptable retrieve techniques.

Effective techniques for catching fish include casting a large soft plastic shad on a stinger rig, letting it fall to the bottom, and then repeating the action with a long lift of the rod tip, letting the lure fall back toward the bottom, and a series of quick twitches. This covers a wide range of depths and can be very harmful to pike.

Winter

You must move more slowly and cast farther in the winter because the water gets much colder. Sinking baits are necessary now because they will stay at the bottom, where pike can easily find them while looking for food sources in the chilly waters. Select lures with high tail vibrations, light load rattles, and additional attractors that sink.

 

DB-Fishing-trying-out-a-large-Coffee-Perch-on-a-canal-in-Manchester-in-Autumn

DB fishing trying out a Savage gear perch Soft Plastic Swimshad Coffee perch. He gives great lure reviews and shows how to fish them. Go to his YouTube Channel to see all the reviews and lure fishing methods.

Pike-grabs-coffee-lure

Best Ways to Fish Lures for Pike Using Soft Plastic Shads

Pike frequently attack anything that resembles a potential meal because, like all predatory fish, they need to find food. The way a soft plastic shad swims naturally when being retrieved makes it one of the most alluring lures for pike. By matching the lure’s size to that of the pike, one can choose the best soft plastics for pike fishing. To mimic larger baitfish that might be consumed by large pikes, larger, softer plastics are needed.

Amazing colors and patterns, lifelike 3D eyes, soft, slim bodies designed for maximum action, slotted backs that allow the back hook to move more freely, and flashabou glowing tails that can be retrieved very slowly to produce an amazing action are all features that pike lures now possess in abundance.

A very efficient method for catching pike is to raise the rod high to draw the shad upwards and then lower it to let the plastic lure sink back down.

Making sure the lure has a large enough hook size to catch the fish is the most crucial step in choosing lures for pike. Using a strong, thick gauge hook greatly reduces the risk of a light wire hook or line being harmed by a pike’s razor-sharp teeth.

Best Soft Plastic Shads for Sale

Displaying some of the most highly rated soft plastic lures for pike fishing used to catch big pike seen in recent times. To see more soft plastic baits click the link

Fishing soft plastic weedless Flukes and split tails can be one of the most productive techniques for targeting bass in the fall. These baits can be fished in a variety of ways, but one of the most popular methods is to walk them across the subsurface.

 

weedless soft plastic fishing One oUsing flukes and split tails can be one of the best ways to catch bass in the fall.  are many ways to fish with these baits, but one of the most common techniques is to walk it across the subsurface.

This retrieve can be very successful for pike or other lurking predatory fish that are hiding in shallow water or dense weed growth.

Read our article Best Soft Plastic Lures for Pike for more info

 

Jigging a soft plastic shad for pike

One of my favorite techniques for catching pike is jigging. Many anglers prefer jigging with a soft plastic shad to other methods, like fishing with surface lures. Jigging equipment is not overly expensive, and it is quick and easy to make the right tackle from supplies on hand. Jigging is an excellent technique for catching pike, particularly in the winter.

If you want to catch pike using this method, you’ll need a good pike winter lure. Because there are so many different types of lures available, selecting the best one for you can be difficult. Jigging is a very flexible method of fishing, so you should pick the right jigging equipment based on where you plan to use it. Jigging can produce excellent results when pike are aggressively feeding close to weed beds or along drop-offs, but it also requires a good presentation.

Jigging Lure Rods for Sale

Jigging rods are quickly gaining acceptance as a method for catching pike, perch, and zander with soft plastic lures in little rivers, ponds, anJigging rods are made specifically for the job; the examples below are excellent. es below. Please click the link to view more jigging rods.

What gear do I need for jigging for pike?

When jigging for pike, you must cast your lure close to the intended target and then jerk it back. You should alter the speed and force of your retrieve based on what the pike are eating. Jigging is a good method for covering a lot of water, but it's important to use an active retrieve. Jigging for pike is effective, even when retrievals are slow and breaks are taken in between. Jigging is a fun way to catch pike, but it requires a lot of time and perseverance.

 

How do i jig for pike?

To jig for pike, you will need to cast your lure near the desired target and then retrieve it in a jerking motion. You should vary the speed and intensity of your retrieve, depending on what the pike are feeding on. Jigging can be an effective way to cover a lot of water, and it is important to use an active retrieve. Jigging for pike can be successful, even using slow retrieves and pauses between them. Jigging is a fun way to catch pike, but it requires a lot of patience and time.

Best ways to fish lures for pike using crankbaits

The crankbait is frequently the first lure that comes to mind when people think of fishing for pike. There are many different varieties of this lure on the market, and it can be very effective for catching pike. Due to the wide variety of lures available, picking the best crankbait for pike can be challenging.

The right rod and reel must be used for this technique. The best reel for this kind of fishing is a baitcasting reel because it provides more control than spinning gear. Additionally, you’ll require a sturdy braid that ideally weighs between 20 and 30 pounds. It’s crucial to use the appropriate retrieve when crankbaiting for pike in a variety of situations.

Best Crankbaits for Pike

For reaching feeding pike in all water depths, the best crankbaits for pike include deep divers, shallow divers, slow sinkers, and suspendClick the link for a larger selection of crankbait lures.link.f crankbait lures click the link

 

Spinning Rods for Crankbaits

selling spinning rods appropriate for fishing with crankbaits. There are a variety of lengths and casting weights available. For the majority of average-sized crankbaits, choose a casting weight of 40 grammes; for large, heavy crankbaits, choose a casting weight of 90 grammes or more. Click the link to see more spinning fishing rods.

What Crankbait Should I Use for Pike?

When fish are feeding aggressively, it can be difficult to decide how to use a crankbait most effectively. In general, you should change your retrieve depending on the type of water you are fishing in and the depth at which the pike are located. In clear water, an active retrieve is typically more successful when hunting aggressive pike. This implies that you should move the lure continuously while varying the force and speed of your movements.

How does the twitch and pause technique work?

When fish are feeding aggressively, it can be difficult to decide how to use a crankbait most effectively. Generally speaking, you should modify your retrieve depending on the type of water you are fishing in and the depth at which the pike are located. Targeting aggressive pike in clear water usually yields better results with an active retrieve. This implies that you need to move the lure continuously while varying the speed and force of your movements. .

What is the twitch and pause method?

To catch inactive pike, use the twitch and pause technique. This technique involves casting your lure close to the intended target and jerkily retrieving it. Between each jerk, you should pause and let the lure float still in the water. Therefore, before attacking your bait, the pike will have time to focus on it.

This technique allows you to cover a lot of ground without alarming the fish, making it ideal for fishing in murky water.

How do i fish a deep diving crankbait?

A deep diving crankbait is relatively easy to fish. Cast your lure into the water, then let it bob around until it reaches the right depth. Give the line a firm tug as soon as it touches the bottom to make the lure dart forward. Your lure will soar back toward the surface if you quickly raise your rod tip. Try using a sinker if you are having trouble getting your lure to dive deep enough.

How to fish a suspending crankbait?

A suspending crankbait is a great choice for fishing in deep water. This type of lure will suspend in the water at the desired depth, allowing you to slowly work it back to the boat. To fish a suspending crankbait, cast it into the water and allow it to sink to the desired depth. Once it hits bottom, give the line a quick jerk to make the lure dart forward. Then, slowly reel the lure back to the boat.

How do i fish a shallow diver?

A shallow diving crankbait is the best lure to use when fishing for shallow-wThis kind of lure doesn't require constant reeling in to maintain the desired depth range and can be worked very quickly. th range.  with this kind of lure is to cast it into the shallows and then quickly jerk it back.

How should a suspending crankbait be fished?

A suspending crankbait is excellent for use when fishing in deep water. This type of lure will suspend in the water at the desired depth, allowing you to slowly work it back to the boat. A suspending crankbait should be thrown into the water and allowed to reach the desired depth before being used for fishing. Quickly jerk the line once it touches the bottom to make the lure dart forward. After that, reel the lure slowly back to the boat.

crankbait

There are many different colours and shapes to choose from.

This is because the bottom structure, water clarity, and pike behavior all have an effect. Jigging the lures simultaneously at various depths will help you find more feeding pike.

Jigging Jerkbait Lures for Pike: Some Tips

Use a slower retrieve in murky water.

When fishing over clear, hard bottom, jig the lure quickly.

For the retrieve, add pauses to allow the bait to sink farther.

Variate your jigging motion’s speed and intensity.

Follow the bottom’s contours by moving the lure in zigzag motions.

Jig the lure as close to obstacles like rocks and vegetation as you can.

What tackle do i need for jerkbaits for Pike?

Pike fishing with jerkbait lures can be a very efficient method of catching this fish, but in order to be successful, the right equipment and lures must be used. We’ll talk about the best jerkbait fishing equipment and lures in this article.

You will need a medium- to heavy-action rod and a reel that can handle a lot of line if you want to jerkbait fish for pike. Additionally, you’ll need strong line, such as braided line, to manage the fish’s sharp teeth. You should use a variety of jerkbaits as lures, such as shad baits, lipless crankbaits, and minnow baits.

When fishing for pike, jerkbait lures are a great option because they can be fished in a variety of ways and are very effective at luring strikes from this fish. When using jerkbaits to catch pike, you can use a variety of retrieves, such as the walk-the-dog, stop-and-go, and twitch retrieves. These lures can also be used in a variety of circumstances, such as early in the morning or late at night, when pike are most active.

If at all possible, use bigger jerkbaits when targeting pike. Because they are more aggressive toward larger prey items, larger members of the pike family will likely target larger jerkbaits. However, when targeting trophy-sized pike, it is frequently best to use a bait that is 6–10 inches in length. Smaller lipless crankbaits often work best because they mimic the type of baitfish that these predators eat.

To be successful when using jerkbait lures to catch pike, it’s crucial to employ a variety of different retrieves. Although jerkbait lures are typically very good at getting this species of fish to strike, they are not always guaranteed to do so. When using these lures, you can increase your chances of success by mixing up your retrieves. You can, for instance, try using jerkbaits to fish in the early morning and late at night for the best results.

Jerkbait Rod

For the lure to work as effectively as possible, a rod with a reasonably stiff action and a length of 6′ to 6 feet is ideal.

Why is it so brief, you ask, as I can hear you doing. For this technique, conventional 9 or 10 foot spinning rods are too long and flimsy because they absorb a lot of your missed strikes and flex with each cast downward stroke, making them useless when they hit the water. The inert jerkbait lures take on life when used with braided line and a short, stiff rod that jerks downward. The rod’s downward jerks can be quite violent, piercing the water’s surface. See More about Jerkbait Rods in our article Best Jerkbait Rods for Pike Lure Fishing

Jerkbait Lure Rods for Pike

To ensure that the lure and the rod tip make direct contact, jerkbait rods are made with a stiff action. The ferkbait comWith each jerk, twist, or lift of the rod, the ferkbait comes to life to mimic a fish that is fleeiA jerkbait is one ofA glider jerkbait moves in a jig-like manner, changing direction with each stiff downward jerk that is followed by a pause. . A glider jerkbait moves in a jig-like manner, changing direction with each stiff downward jerk that is followed by a pause. This rod is a requirement if you want to use jerkbaits. To see more jerkbait rods, click the link.

How do I retrieve a jerkbait properly?

The fundamental method of retrieval is to let the lure sink before jigging it up and down with your rod tip. Jigging with jerkbaits can vary depending on the clarity of the water, the structure of the bottom, and the behavior of the pike. Finding more feeding pike can be accomplished by simultaneously jigging lures of different depths.

The jerkbait lures that work best for pike will vary from lake to lake despite the wide variety of shapes and colours that are available.

This is as a result of the interplay between pike behavior, water clarity, and bottom structure. If you jig the lures simultaneously at various depths, it will be simpler to locate more feeding pikes.

 

Jerkbait Reels

Reels are generally not given much thought by people. They simply pick the first reel they see and give it a try, but there are many different reel types for different purposes, and each one may perform slightly better than the others when it comes to fishing, depending on things like line weight (light/medium), recommended spool material (graphite composite), etc. A good investment would be an ambassadeur 6501 left hand wind because they have stood the test of time. To see our post Best Baitcaster Reels for Pike Lure Fishing

Lines

For the fisherman, the distinction between braid and mono is crucial. When using braided line, you can more easily feel any takes because it has less stretch. This is especially useful if you’re searching for a particular species that might be hiding on bottom-dwelling lures.

I frequently employ a breaking strain of 60/100 pounds when jerk bait fishing. Most people are perplexed when they assume that this refers to forcing fish into the net, but in reality, you want heavier braid to prevent stretch (shock absorbency). Weaker 20 pounds of braided line is more likely to come loose during the cast if you’re using a heavy jerkbait lure.

 

Best Jerkbait lures for Pike

The jerkbaits that frequently catch pike are listed below. Although jerkbaits are simple to cast, the best performance comes from using a baitcaster reel and short, stiff jerkbait rod. To view more Jerkbaits Click the Link.

Jerkbait Traces

Wire traces for jerkbait lures have several advantages, including the capacity to withstand the rough treatment you give them when casting large plugs and the capacity to prevent tangles as your bait propels itself forward over their flexible line. 

Because it performs noticeably better and lasts noticeably longer than other brands currently on the market, I switched to 100 lb breaking strain titanium trace.

Surface Lures for Pike

Which surface lures for pike work best f? What kind of lures and tackle are best for surface lure fishing for pike? Many anglers want the answers to these queries.

Let’s start by looking at the equipment needed for pike surface lure fishing. A high-quality rod and reel that can handle large fish are required. In order to present the lure and set the hook in a way that will guarantee success, you’ll also need some sturdy and trustworthy equipment.

The line should be at least 20 lbs. strong and made of monofilament or braided line; it shouldn’t be too thin because it could break if the drag is set too tight, but it also shouldn’t be too thick.

If you’re a beginner and still don’t feel confident with the fundamentals of pike lure fishing, I strongly advise you to pick up a good book or two on the subject to learn the laws and regulations in your area, how to fish from a boat for pike surface lures, and other crucial information.

Now that you have the right tools, what lures should you use for pike surface lure fishing? Although there are many different kinds of lures available, some are more effective than others. spoons jiggling and min

Walk-the-dog retrieve

Surface lures can be worked very successfully with a walk-the-dog retrieve, making them some of the best lures for pike surface lure fishing. Successful jerkbait use requires keeping the rod tip up while jerking the lure back and forth through the water with short, quick jerks. This conduct resembles a baitfish fleeing a predator.

You can use a variety of retrieve techniques when fishing with these kinds of lures, including the twitch retrieve, the stop-and-go retrieve, and the walk-the-dog retrieve. 

Although jerkbait lures are effective at getting Pike to strike, you should vary your retrieves for the best results.

Top Performing Surface Lures for Pike

The most effective surface lures for pike are listed below. Feeding pike with jerking and twitching techniques makes it difficult for them to resist. When using surface lures, keep in mind to use strong braid because pike attack them vigorously. Also you can see our article Best Surface Lures for Pike and How to Fish them

 

However, wait until the rod begins to bend before striking; many anglers strike at first sight, which is typically too early. Remain calm and wait for the pike to signal you that he is on through your rod. To browse more Surface Lures Click the Link.

 

Swimbait Lures for Pike

Because of their lifelike swimming motion that makes them seem to act and move like the real thing, swimbait lures are very simple to fish with. The majority of swimbait lures for pike have a long, slender body that is tapered at both ends. These lures come in a wide variety of designs. 

Swimbait lures mimic the swimming and out-of-water appearance of a baitfish. A swimbait lure that looks like a simple meal is irresistible to pike. Hard plastic, soft plastic/hard plastic hybrids, and soft plastic naturally fastened to a stinger rig are all possible materials for swimbait lure construction.

Best Ways to Fish Swimbait Lures for pike

There are numerous ways to fish with swimbait lures. The most typical technique for using a swimbait lure to catch pike is to slow down the retrieve and let the lure bob around in the water naturally. Swimbait lures can be “jerked” up and down with the rod tip to quickly move through the water. If fish are breaking the surface, this method may be especially effective.

Swimbait lures can also be used to fish in or near structures like lily pads, stumps, downed trees, and weed beds. Put the lure as close to the area where you believe pike are hiding as you can. Due to pike’s propensity for waiting until a fish is within striking distance before striking, swimbait lures are very effective when fished close to reed beds.

With their lifelike swimming motion that makes them appear to act and move like the real thing, swimbait lures are very simple to fish with. Swimbait lures are tied onto jig heads and come in a variety of sizes and colors. The lures you use to catch fish swim back and forth like a swimming fish does.

When fishing, you can decide how quickly or slowly you want to work swimbait lures. One of the best methods for catching a large pike, if done correctly, is swimbait fishing for pike. Swimbait pike lures are by no means difficult to use, and many fishermen use them frequently.

The Savage gear hybrid pike swimbait is one of the top swimbait lures for pike available today. This swimbait can be worked very slowly or quickly and is made to look and behave like a real pike. Another excellent swimbait lure for pike that can be fished in a variety of ways is the Savage gear 4 play Swimbait.

The four play Swimbait can be retrieved in a variety of ways and is made to have a lifelike action. Swimbait lures are effective for a variety of game fish, including bass, musky, and pike. Using swimbait lures is a simple and effective way to catch large fish. The next time you go pike fishing, try using Swimbait lures; you won’t be disappointed.

Take a look at some of the top swimbaits below if you’re looking for the best swimbait lure for pike.

Sean, part of the lure fishing duo on the Snagged Bro YouTube Channel. He caught this lovely pike on a large lure. See mor of these pair of lure fishing fanatics and get great tips for lure fishing on the canals and more.

Best Ways to Lure Fish for Pike using Finesse Tackle

A finesse pike lure is essentially a significantly scaled-down version of a pike lure setup that excels on canals, tiny rivers, and crystal-clear lakes. The smaller soft plastic lures are much simpler to cast and work better in confined spaces. Using small barbless stinger hooks increases your chance of successfully landing the fish because they are less likely to hurt it. As they produce a lot of flash and vibration, 3-5 inch paddle tail shads are a great choice for finesse pike lure fishing.

Smaller pike are not picky and will take any small, soft plastic. Small 1-3 inch slender curly-tailed grubs are a great go-to option for smaller finesse lures, and they seem to be the best option.

A small swim jig is another excellent option, though it won’t vibrate as much as a paddle tail shad.

A 1/8oz jig head is a good place to start, but you may need to go lighter or heavier depending on the situation. Like all lure-based fishing,

For best results, keep your retrieve slow and steady. Since pike are ambush predators, a long cast and a slow retrieval are essential. Pike frequently strike at lures as they pass by them.

Larger pike respond extremely well to smaller soft plastic lures, especially if you’re fishing near a structure like a fallen tree where the fish can easily conceal themselves from their prey. You won’t be let down if you try finesse pike lure fishing to catch one of these ferocious predators.

Tackle for Finesse pike lure Fishing

A 8ft Spinning rod weighing 20-40 grammes with a soft tip action is required for finesse pike lure fishing because it is the best ch

oice for these small pike lures. Spin reel from the 300 series with a fixed spool and 10-15lb braided line. a reliable spinning. The 10lb braided line is small and flexible enough for small hooks while still allowing you to feel the bite and detect subtle takes.

Reduced wire traces with a 15-lb breaking strength should be tied to your mainline with a palamar knot. Trace should only have a brief clip close to the business end for straightforward lure changes.

Final Thoughts

So if you’re looking for a novel and enjoyable fishing challenge, why not give pike lure fishing a try? This kind of fishing can be very profitable because pike are some of the most ferocious and powerful fish in the water. You can successfully land these apex predators and leave with a few tales to tell if you have the right equipment and knowledge. Have a good day and thanks for reading. “Tight Lines”

×
×

Cart